How To Change DIP Switch Settings

Most of our Z-Flash modules feature DIP Switch Settings that are located on the back of the unit.

If you have one in your hands, as you can tell, they are very small.

The best way to tell what each setting is switched to is by taking a picture of it and zooming in.

Generally the Z-Flash DIP Switches are always set to OFF from factory.

What Tools Could I Use To Change The Switches?

We suggest to use a small pick tool or a small flathead screwdriver or something similar in order to flip the DIP Switches.

This will probably be the best way to change them.

Please make sure that the truck is on with the Z-Flash also activated for the changes to go into effect.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.