Z-Flash OBD for GM Quick Start Guide

Before installing, verify you have all the correct pieces:

1 - OBD for GM Module

2 - On/Off Switch

Step 1

While the vehicle is off, connect the Z-Flash OBD-2 Module to the OBD-2 Pass Through Switch. 

Step 2

With the vehicle off, plug in both the Switch and Module into your vehicle simultaneously 

Step 3

Start your vehicle and activate the module using the Switch by holding the button down for 1 second. To change patterns, press it again for pattern 2 and repeat for pattern 3. Do it once more to turn off the Z-Flash. 

When activated, you can increase the pattern speed by pressing the door lock button.